Automotive Paint Booths Filters

Product Lines

Brands We Sell

Carrying GFS, Goff, Paint Pockets, EuroVac, Becca and Titan Brands

FAQ

How do I know which unit is right for my operation?

We prepare a site evaluation as well as work with your project manager to insure you get the right unit for your needs

What training is available after installation?

We offer a complete turn key service. Our technicians do an intense start up procedure. Then we provide a training session for all people involved in the operation of the equipment.

How long is the warranty?

Global Finishing Solutions has a one-year warranty on all of their equipment.

What services do you offer for our equipment?

We offer a 25+ point tune up to insure the proper functioning of your equipment. In addition, we do complete service for any repairs that are needed.

Do you offer in-house financing?

We recommend several finance leasing companies. They will work closely with you during the financing process.

What is your return policy?

Filters and Parts may be returned within 30 days.
All returns must be pre-authroized. And in their original package.
A 30% re-stocking fee will be charged to your account. Prior shipping will be expected to be paid within 30 days.

Why did the EPA develop Rule 40 CFR part 63 (6H)?

The EPA developed these rules for all coating operations to reduce the risk to personnel and the environment. A Best Practices Outreach Kit can be downloaded at their web site at http://www.epa.gov/dfe/pubs/projects/auto

Who does this rule apply to?

  • Paint stripping operations that use Methylene Chloride (MeCl)
  • Spray applications of coatings to motor vehicles and mobile equipment
  • Spray applications to a plastic and/or metal substrate where the coatings contain compounds of chromium (Cr), lead (Pb), manganese (Mn), Nickel (Ni), or cadmium (Cd).

Who is exempt from this rule?

  • Armed Forces of the United States, or locations that support the military transportation equipment.
  • Hobbiest for personal vehicles that do not spray more than 2 vehicles per year.
  • Spray operations that only spray out of a 3 ounce spray gun.
  • Locations that meet the definition of “research and laboratory activities” or “quality control activities”
  • Shops can ask for an exemption if their coatings do not contain the 5 compounds Cr, Pb, Mn, Ni or Cd.

What filters are required to be reported to the EPA under the 98% efficiency?

The only filters that are required to be 98% efficiency are floor, back wall or side wall filters that capture any overspray. These filters are to be tested to capture 98% of 10 microns or smaller (MERV 7). Intake, pre-burner and ceiling filters are not required to meet this rule because they do not capture overspray.

What is the best filter to capture paint overspray in my booth?

Paint overspray arrestors come in materials made from fiberglass, polyester, paper, and styrene. Automotive paint atomizes between 7-50 microns from a HVLP gun and transfer to a vehicle between 85-90%. Overspray particulates then evaporate even further town to sizes between 5-25 microns. These are the particles that need to be captured to prevent caking up onto fan blades, exhaust stacks and getting out into the environment.

What should I consider when deciding on an exhaust filter?

Look at cost per square foot and how long the filter lasts. If a filter captures more overspray upfront, that means less particles can clog up the secondary filters that costs you more money. Look for a filter that allows less through at 10 microns or less. Many filters listed at 98% or better do not mention what micron they capture.

When do I need to change the exhaust filters?

Each spray booth is required to have a pressure gauge (manometer or magnahelic) that measures static differences between the two sides of the filters. Every filter’s information sheet will have listed the starting point (0.02-0.06 WG) and the ending point (0.05-10.0 WG). Every exhaust system will evacuate airflow differently due to differences of the motor, blade and exhaust stack size. You want to choose a filter that has the greatest difference between the starting and ending point. A good rule of thumb is to change the filter prior to the listed end point to prevent dried overspray from staying in the booth and falling down onto your spray job.

For more information: